Start Power offers a wide selection of Flender couplings that can be used in many industrial sectors.
The following couplings and spare parts are available:
- ARPEX All-steel coupling (stainless steel upon request)
- ELPEX-S Highly flexible, torsionally rigid couplings
- ELPEX Highly elastic tyre couplings
- N-EUPEX-DS Elastic couplings without protection against pad wear
- N-BIPEX Front timing elastic couplings, equipped with protection against pad wear
- N-EUPEX Universal elastic couplings for compensating shaft misalignment
- RUPEX Universal flexible pin couplings
- FLUDEX Hydrodynamic couplings
- ELPEX-B Highly elastic tyre coupling
- ZAPEX-ZIDouble-jointed gear couplings
- ZAPEX Steel double-jointed gear couplings
- PLANOX Dry friction clutch
- Spare parts for couplings
- Data sheet
- Application area
Application area Couplings
Advantages for Couplings
- All-steel coupling Available from 5 Nm up to 10.000.000 Nm torques. Available also in conformity to API 610 standards.
- Double-jointed gear couplings with outer barrel teeth and low backlash. Available ex stock in 12 sizes up to torque 125.000 Nm and maximum hole of 250 mm.
- Dry friction clutch with variable plates from one to three for high torque transmission with compact design. Available in 22 sizes and 14 types with torques up to 30.000 Nm.
- Elastic couplings with no fail-safe system to allow flexibility in case of wear. Torque range from 60 to 21.200 Nm in 19 sizes.
- Front timing elastic couplings. Resisting to heavy loads. Long-lasting service life. High torques pick absorption capability. Available in 10 sizes from 12 Nm up to 4.650 Nm.
- Highly elastic tyre coupling for large misalignment. Available in 15 sizes, from 24Nm up to 14.500 Nm torques.
- Highly elastic tyre coupling, can be used for large shaft misalignment. Suitable for high dynamic loads, good damping properties. Available in 9 sizes for torques from 1.600 up to 90.000 Nm.
- Highly flexible, torsionally rigid couplings Available in 17 sizes with nominal torques from 330 Nm to 63.000 Nm.
- Hydrodynamic couplings . Available in 15 sizes from 1.2 kW up to 2.000 kW.
- Steel double-jointed gear couplings to compensate angular and axial misalignment. Standard range available in 31 sizes, for torques up to 250.000 Nm and maximum holes up to 270 mm.
- Universal elastic couplings for compensating shaft misalignment. Torque range from 19 to 62.000 Nm in 23 different sizes and 10 different types.
- Universal flexible pin couplings with motion transmission after pad breakage. Standard torque range from 200 to 1.300.000 Nm Standard series in 26 sizes.